![]() If the printer does not feed the labels, make sure the first label is fully inserted and then press the form-feed buttonĮxcept as noted below, all DYMO compatible labels will work with the following printers: ![]() The printer feeds the labels, stopping at the beginning of the first label.Align the left edge of the label with the left edge of the label feed slot and insert the label into the slot.Slide spool assembly into cradle on top cover.Place the locking ring onto the right side of the spool and press tightly against the side of the label roll, leaving no gap between the roll and the spool. ![]() Hold the spool in your left hand and place the label roll on the core shaft so that the labels feed from underneath and the left edge of the label roll is flush. ![]() Remove used core by separating spool from locking ring (spool has core shaft while the locking ring is the piece without core shaft on right).Follow these step-by-step instructions for loading your new labels into your Dymo® LabelWriter Printer:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |